How to choose the right reducer

There are many types of reducers. At present, as far as VEMT is concerned, there are four series of reducers, hyperboloid reducers, worm gear reducers, planetary reducers, orthogonal shaft reducers, harmonic reducers and some agency reducers. category.
The motor is also known as the motor. There are brake motors, frequency conversion motors, servo motors, speed control motors, explosion-proof motors and ordinary motors.
Choose the matching of the reducer and the motor according to your own needs, for example, use in places with relatively large dust. Generally speaking, the reducer and the motor are matched to match the performance parameters of the two according to the data, and ordinary motors are generally used. However, in a dusty environment, it is usually considered to be equipped with an explosion-proof motor instead of a brake motor, because sparks will be generated during the braking process, and sparks and dust may cause safety hazards. At this time, you can explain to the salesman what kind of environment the reducer or motor you need will be used in, so that you can better recommend the reducer or motor that suits you. In addition to eliminating safety hazards, a suitable reducer motor will also produce higher work efficiency.
In addition, some choose the right one, and some do not choose the right one because of professional knowledge. For example, the problem of load, the actual load is 3 tons. However, only the torque and installation size are considered when selecting the model. However, after using it for a while, I found that the reducer and the motor had some minor problems, and the work efficiency was relatively low because it was not strong enough to drive the working machine. At this time, the wear of the motor or reducer is also relatively large. Sometimes the shaft may break if the load cannot be applied. Therefore, the suitable type of geared motor reducer can make the work smoother.
waylead.com.cn